1.Concrete Block Joints

All concrete and Block joints must be covered with a chicken wire mesh.

2.Surface Clean

The surface should be free from oil, grease, paint, loose plaster or dirt particles.

3.Wall Wetting

Dampen the wall before application of plaster.

4.Mix Preparation

In 8-10 liters of potable water add 1 bag of Quick Super Ready Mix Plaster.

5.Leave To React

Leave the mix to react for 5-10 min and remix before use.

6.Cement Slurry

Apply cement slurry. If the surface is smooth and dense, the surface should be made rough.

7.Remixing

Re-mixing should be done for 5-10 minutes.

8.Apply On Wall

The mixture should be thrown while the cement slurry is wet. Ensure leveling with the help of tools.

9.Second Coat

If 2nd coat is required, ensure grooving on first coat to provide good grip for 2nd coat.

10.Leveling

After final coat ensure proper leveling with the help of appropriate tools.

11.Water Curing

If 2nd coat is required, ensure grooving on first coat to provide good grip for 2nd coat.