1.Floor Base Preparation

Floor Surface where tile has to be fixed should be of concrete base, properly cured, leveled and free of cracks.

2.Wall Base Preparation

Wall Surface where tile has to be fixed should be of concrete base, properly cured, leveled and free of cracks.

3.Clean Surface

Clean surface by wire brush and ensure contamination-free area.

4.Mixing Tile Adhesive

Pour Quick Super Tile Adhesive into water as per required ratio.

5.Mixing

Mix the paste using hand mixer for 5 minutes.

6.Rest

Rest for 5-10 min and remix again for 2-3 min.

7.Floor Wetting

Floor Wet the surface and tile before application.

8.Wall Wetting

Wall Wet the surface and tile before application.

9.Apply

Apply adhesive on the wall/floor using trowel at a thickness of 3-6 mm and comb with notch trowel. Do not spread more than 1 sq. m of area at a time.

10.Fix Tiles

Fix tiles firmly into position with a sliding motion and hammer with soft mallet to ensure a better bond.

11.Cleaning Adhesive

Clean off excessive adhesive between the joints and on tiles with a damp cloth.

12.Leave To Dry

Do not disturb the tiling for minimum 24 hours.