1.Mortar Mixing

In a clean bucket, mix Quick Super Jointing Mortar thin bed mortar in 25-30 % of water.

2.Mixing By Mixer Or Tool

Mix first for 5-10 minutes by hand or electrical mixer to mix homogeneously.

3.Reaction Time

Allow mortar to stand for 5 minutes.

4.Mortar Remixing

Mix again for 2-3 minutes. Now thin bed mortar is ready to use.

5.Clean Surface

Before application clean the surface of blocks using suitable tools like brush so that any foreign material is not held on the blocks.

6.Wet Surface

Wet the surface of blocks before applying mortar.

7.Mortar Spread

Mortar should be spread on all sides of block in such a way to maintain the bond thickness 3 - 5 mm.

8.Alignment

Use Spirit Level and fibre hammer to remove any air gaps in between blocks for proper jointing and alignment.

9.DND

Do not disturb the wall after application of mortar for at least 24 hours.

10.Setting Time

The setting time is affected by climatic conditions, allow stand-alone time accordingly.